Here's what I found:
| Function | Parameter | Typical Setting | |----------|-----------|------------------| | Start/stop source | P0.03 | 0 (keypad) / 1 (terminal) | | Frequency source | P0.06 | 0 (keypad potentiometer) / 2 (analog input) | | Motor rated current | P2.01 | Match motor nameplate (A) | | Acceleration time | P0.11 | 10–30 seconds | | Fault reset | P7.00 | 0 (manual) / 1 (auto) | invt che100 manual pdf
You can find the Invt Che100 manual in PDF format through the following sources: Here's what I found: | Function | Parameter
If you cannot locate the INVT CHE100 manual PDF, contact: Manual Structure & Key Sections
| Fault Code | Meaning | Likely Fix | |------------|---------|-------------| | Err01 | Overcurrent during acceleration | Increase accel time (P0.11) | | Err02 | Overcurrent during deceleration | Increase decel time (P0.12) | | Err05 | Overvoltage | Check braking resistor or decel time | | Err09 | Undervoltage | Check input power supply |
Supports Sensorless Vector Control (SVC), V/f control, and torque control. Performance: Offers a start-up torque of (SVC) and a speed adjusting range of Overload Capacity: Rated for current for 60 seconds and for 10 seconds. Built-in Braking: Units from include a built-in braking unit for rapid stopping. Manual Structure & Key Sections